Navigation: February Page,
Front, Engine,
Inside, Trunk,
Rear
|
 |
|
Before the paint went on. The frame is made out of 4x4" CCA
wood with casters, mounts rest on the locations where the jack points are on
the car. |
 |
|
Paint without the clear coat. This shows the holes where the
euro front bumper brackets fit, and some of the factory drain holes for the
front clip. |
 |
|
The view looking towards where the strut will mount. The two
holes are for the brake lines. |
 |
|
A view showing the calked and sealed turn signal well.
|
 |
|
After the clear coat is applied... it's as good as new. Now
to keep the rocks out! |
